ELZ Binocular Microscope Assembly Instructions

RSS

Build the stand as per the instructions included in the box.
Remove all the protective caps and covers from the microscope body.

Place the microscope body on the focus mount (e-arm) and attach it securely with the set screw.



Place the eye-piece inside the microscope eye-ports.



Place the rubber eye-cups onto the eye-pieces for added comfort.



Attach the auxiliary lens to the bottom of the microscope body.

Lighting Options

Florescent Ring Light :

Pull back all three prongs, and attach firmly to the auxiliary lens or ring light adapter.

LED Ring Light:

Pull back all three prongs, and attach firmly to the auxiliary lens or ring light adapter. Attach the LED ring light to the power adapter, turn it on, and adjust the lighting power.

Fiber Optic Annular Ring Light

Pull back all three prongs, and attach firmly to the auxiliary lens or ring light adapter.



Place the free end of the fiber optic cable into the fiber optic illuminator and tighten it into place with the set screws. Turn the fiber optic illuminator on and adjust lighting accordingly.

Fiber Optic Dual Pipe Light

Place the free end of the fiber optic dual pipe light into the fiber optic illuminator and tighten it into place with the set screws. Turn the fiber optic illuminator on and adjust lighting accordingly.

Previous Post Next Post

  • Last Updated
  • Chris Huckabay