Instructions for Assembling the MAC Package and Macro Zoom Lens Systems

RSS

Macro Zoom Adapter & 76mm – 47mm



Place the Micro Zoom Adapter over the Macro body, then carefully slide down with the lip point upward.

(NOTE: If you are having trouble sliding the adapter on, simply remove the label on the upper part of the body.)

With a flat head screw driver, tighten down the three screws on the zoom body.

By the lip of the adapter, carefully lower the Macro Zoom Lens into place until it is firmly seated.

Camera with applicable camera adapter.

Gently attach the adapter to the camera.

With the adapter attached, screw the camera onto the macro body.

(NOTE: If any kind of camera adjustment is needed, rotate the body until the camera is pointed away from you.)

Lighting Options

LED Ring Light

Retract the three attached prongs, then tighten them evenly until they are secure.

Flourecent Ring Light

Retract the three attached prongs, then tighten them evenly until they are secure.

Fiber Optic Annular Ring Light

Retract the three attached prongs, then tighten them evenly until they are secure.

Insert the Fiber Optic Annular Cable into the illuminator, and then secure it with the two set screws.

Fiber Optic Dual Pipe Light

Firmly place the Dual Pipe Light into the Illuminator and tighten the two set screws.

Previous Post Next Post

  • Last Updated
  • Chris Huckabay