Assembly Instructions for the SZ Trinocular Package Systems

RSS

Assemble the stand per the instructions provided in the box. Remove all caps and covers from the trinocular body.


Attach the trinocular body to the focus mount (or e-arm) and secure with the set screws.



Place the eye pieces into the microscope’s eye-ports.



If requested, apply the rubber eye-cups to the eye pieces.



Place the video coupler into the microscope body’s video port and secure with the set screws.



If needed, attach the spacer/adapter to the camera.



Screw the camera securely into the video coupler, then tighten into place with the set screws.



Attach the power supply and video cable to the camera.



Always make sure that the text is always facing the user during operation.



If you wish to activate “video mode”, simply slide the video converter switch to “PHOTO IN”. This will result in the eye ports shutting and the video port opening.



Screw the auxiliary lense, or ring light adapter, directly to the bottom of the microscope’s body.

 

Lighting Options

Florescent Ring Light

First, retract all three prongs, then attach to the auxiliary lens or ring light adapter. Power on.

LED Ring Light

First, retract all three prongs, then attach to the auxiliary lens or ring light adapter.

Connect the LED ring light to the power adapter and switch it on.



Fiber Optic Annular Ring Light

First, retract all three prongs, then attach to the auxiliary lens or ring light adapter.



Insert the free end of the fiber optic cable into the fiber optic illuminator, then tighten with the two set screws. Power on the fiber optic illuminator and adjust brightness to taste.



Fiber Optic Dual Pipe Light

Insert the free end of the fiber optic dual pipe light into the fiber optic illuminator, then tighten with the two set screws. Power on the fiber optic illuminator and adjust brightness to taste.

Previous Post Next Post

  • Last Updated
  • Chris Huckabay