Vision Engineering presents the Electronics Academy Webinar Series


Vision Engineering webinarVision Engineering has teamed up with industry-expert Bob Willis to bring you a FREE Electronics Academy Webinar Series, taking an in-depth look at the issues affecting PCB/SMT assembly and the challenges of achieving Zero Defect Manufacture.

Gain valuable insight and learn expert tips to identify quality issues and understand the common causes of solder joint failure. 

Upcoming Webinars
Thursday 16th June - Solder Joint Inspection & Process Defects
Wednesday 29th June - Counterfeit Component Inspection & Detection
Thursday 21st July - Conformal Coating Inspection & Coating Faults

Thursday 16th June

9.30am EST - Solder Joint Inspection & Process Defects
presented by Bob Willis
(60 minutes)

>> Learn how to minimize inspection and process defects
>> Identifying common joint failures
>> Causes, cures, corrective actions

    In the first webinar, Bob explains the best ways to inspect solder joints on conventional and surface mount assemblies with reference to international standards (e.g. IPC 610 and IPC J-STD-001).

    In addition, the webinar will illustrate some of the most common joint failures, why they occur and the corrective action required.

    Places are limited so sign-up now!
    Register for Vision Engineering Webinar
    Can’t make the webinar? All registrants receive a copy of the presentation slides. 
    Find out more, or register for future webinars in the Electronics Academy Series. 
    Learn expert tips to understand the common causes of solder joint failure.

    About Bob Willis

    Bob Willis is a globally-recognized expert in surface mount and area array technology, providing training and consultancy to electronics manufacturers worldwide for the past 30 years.
    Bob regularly speaks at international events, providing expert knowledge to improve skills and knowledge for electronics production staff and engineers.

    Previous Post

    • Last Updated
    • Chris Huckabay